Freelander 1 Gearbox engine mount

2004 HSE TD4 121k

Hello to all
Today was day for the front suspension and to try to fix the clunk on the front right side (ball join was the reason)
Subframe out and bushings form torsion bar were replaced, new control harms, new brake disk and pads.
When the subframe came out I noticed that the gearbox engine mount moves VERY free for the sides but no back forwards so that's how is it is?

Many thanks

The power unit will rock backwards and forwards freely if the lower tie bar isn't fitted. It might move side to side a small amount if levered, but only on the bushings.