Galvanised capping

N

Neil Paxman

Guest

• Mar 23, 2005

• #1

Hi

Anyone have any ideas about restoring the galvanised capping which joins the
body panels on my Series III 88"? Have sourced the Bronze Green and
Limestone gloss and some etching primer for the body panels, but the
galvanised strips are a bit grotty. Any tips gratefully received

 

T

Tom Woods

Guest

• Mar 23, 2005

• #2

On Wed, 23 Mar 2005 20:22:00 +0000 (UTC), "Neil Paxman"
<[email protected]> wrote:

>Hi
>
>Anyone have any ideas about restoring the galvanised capping which joins the
>body panels on my Series III 88"? Have sourced the Bronze Green and
>Limestone gloss and some etching primer for the body panels, but the
>galvanised strips are a bit grotty. Any tips gratefully received

If you drill out/remove the rivets all the galvanised bits can be
removed and you could then get the re-galvanised.

 

A

Austin Shackles

Guest

• Mar 23, 2005

• #3

On or around Wed, 23 Mar 2005 20:22:00 +0000 (UTC), "Neil Paxman"
<[email protected]> enlightened us thusly:

>Hi
>
>Anyone have any ideas about restoring the galvanised capping which joins the
>body panels on my Series III 88"? Have sourced the Bronze Green and
>Limestone gloss and some etching primer for the body panels, but the
>galvanised strips are a bit grotty. Any tips gratefully received
>

how much do you want to spend?


you can replace 'em... or if they're sound, you can probably get 'em
re-galvanised.

--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
Blue: The sky is blue for a reason. Blue light is a source of strength
and harmony in the cosmos. Create a blue light in your life by
telephoning the police
from the Little Book of Complete B***ocks by Alistair Beaton.

 

L

Larry Shaw

Guest

• Mar 23, 2005

• #4

'Galvafroid' (think it's a finnigans product)... Thats a brush-on option,
but only real way is regalvanising







Larry
www.union-revival.com ok a crap signature, but at least the mails bug free






"Neil Paxman" <[email protected]> wrote in message
news:[email protected]...
> Hi
>
> Anyone have any ideas about restoring the galvanised capping which joins
the
> body panels on my Series III 88"? Have sourced the Bronze Green and
> Limestone gloss and some etching primer for the body panels, but the
> galvanised strips are a bit grotty. Any tips gratefully received
>
>

 

A

Adrian Ford

Guest

• Mar 24, 2005

• #5

"Larry Shaw" <[email protected]> wrote in message
news:[email protected]...
> "Neil Paxman" <[email protected]> wrote in message
> news:[email protected]...
> > Hi
> >
> > Anyone have any ideas about restoring the galvanised capping which joins
> the
> > body panels on my Series III 88"? Have sourced the Bronze Green and
> > Limestone gloss and some etching primer for the body panels, but the
> > galvanised strips are a bit grotty. Any tips gratefully received
> >
> >
>
> I use Hammerite Hammered Silver looks good can be obtained from
Wilkinsons, B&Q , Halfords etc.

Adrian Ford

 

R

Richard

Guest

• Mar 24, 2005

• #6

When I did my series III swb I painted them with silver hammerite but
thinned down so it wasnt too much of a 'hammered' effect.
I am going to be doing my 90 ones soon but this time I'm going to take them
off and have them galvanised (they are the original painted ones). The
galvanising is done by weight so shouldnt cost too much.
Richard



"Neil Paxman" <[email protected]> wrote in message
news:[email protected]...
> Hi
>
> Anyone have any ideas about restoring the galvanised capping which joins
> the
> body panels on my Series III 88"? Have sourced the Bronze Green and
> Limestone gloss and some etching primer for the body panels, but the
> galvanised strips are a bit grotty. Any tips gratefully received
>
>

 

N

Neil Paxman

Guest

• Mar 25, 2005

• #7

Many thanks for all the suggestions. Here goes!
"Richard" <[email protected]> wrote in message
news:[email protected]...
> When I did my series III swb I painted them with silver hammerite but
> thinned down so it wasnt too much of a 'hammered' effect.
> I am going to be doing my 90 ones soon but this time I'm going to take
them
> off and have them galvanised (they are the original painted ones). The
> galvanising is done by weight so shouldnt cost too much.
> Richard
>
>
>
> "Neil Paxman" <[email protected]> wrote in message
> news:[email protected]...
> > Hi
> >
> > Anyone have any ideas about restoring the galvanised capping which joins
> > the
> > body panels on my Series III 88"? Have sourced the Bronze Green and
> > Limestone gloss and some etching primer for the body panels, but the
> > galvanised strips are a bit grotty. Any tips gratefully received
> >
> >
>
>