Fuel sender end filter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Fatrover

Fatrover

Well-Known Member
Posts
914
Location
Argyll, Scotland
Hi all, last year the little filter on the end of my fuel sender fell off into the tank….Ive been running it this way with no problems at all. I’ve just changed the main fuel filter and I wonder just how important the filter at the sender end is ? If anyone knows where to get one of the little filters I’d be very grateful, I can’t find any info anywhere…..
IMG_0957.jpeg
 
Take the sender out of tank and have a look as to amount of crud in tank with a torch.
Change filter again soon and see what's in it.
 
Tried that….cant see a thing in the tank and the bung on the bottoms seized.

Changed the filter today will cut the old one open and see what’s in it only changed it last year but a couple,of days ago it was rough to start so changed fuel filter now alls well hence my suspecting crud getting sucked up via sender. Might solder a gauze kind of cage round the bottom of it, that might do, fine wire gauze maybe….more thinking 🤔

I should add for context that the rover spent its life from 1978 until 2018 in the Canary Islands, on Tenerife and latterly Fuerteventura when we moved. I’m suspecting the tank might be badly contaminated with the very fine, almost caster sugar consistency dust we used to get over there. Wondering whether I should just drop the tank and see…..
 
Last edited:
Fatrover said:
Tried that….cant see a thing in the tank and the bung on the bottoms seized.

Changed the filter today will cut the old one open and see what’s in it only changed it last year but a couple,of days ago it was rough to start so changed fuel filter now alls well hence my suspecting crud getting sucked up via sender. Might solder a gauze kind of cage round the bottom of it, that might do, fine wire gauze maybe….more thinking 🤔

I should add for context that the rover spent its life from 1978 until 2018 in the Canary Islands, on Tenerife and latterly Fuerteventura when we moved. I’m suspecting the tank might be badly contaminated with the very fine, almost caster sugar consistency dust we used to get over there. Wondering whether I should just drop the tank and see…..
Click to expand...
A 'gauze kind of cage' is exactly what my Lightweight has!

1708120411281.png


www.ebay.co.uk

Land Rover Series 2/II/3/III fuel pickup pipe NRC6905 503492 repair mesh/filter | eBay

Pic 3 shown for reference only.
www.ebay.co.uk
 
If you have skinny arms you can clean out tank through the hole and seal with tank sealer gives a nice clean finish and then your confident all crud out , but need to remove tank to roll it around to get even. Covering of sealer paint
 
I’m 6’4 and 18st with arms like a gorilla…..only way I think is to drop the tank. Madly annoying that the bung is seized, tried it last year but was worried about ripping the arse oot the tank
 
Fatrover said:
Hi all, last year the little filter on the end of my fuel sender fell off into the tank….Ive been running it this way with no problems at all. I’ve just changed the main fuel filter and I wonder just how important the filter at the sender end is ? If anyone knows where to get one of the little filters I’d be very grateful, I can’t find any info anywhere…..View attachment 310507
Click to expand...
Take a look at paint sprayer filters
 
You must log in or register to reply here.

Similar threads

S
Series 3 Diesel fuel bleed / starting issue
Replies
7
Views
1K
sjr202
S
MaxTheDog1
Freelander 1 Fuel filter - 1 or 2?
Replies
2
Views
735
MaxTheDog1
MaxTheDog1
S
Starting issue. Fuel system bleed
Replies
8
Views
1K
sjr202
S
J
Lurching Series 3
Replies
13
Views
1K
TS2304
TS2304
C
After new tank and Sender fuel gauge not working
Replies
3
Views
1K
Career 707
C
Back
Top