help please on my td4 2006.i have problems with the fuel rail sensor plug. driving i sometimes get a miss fire, engine dose not stop and no warning light on,i check under bonnet and play with the sensor plug then all is good for some time. i have cleaned glug connections a few times now but problem keeps happening,any thoughts please
Freelander 1 fuel rail sensor plug
- Thread starter radevo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
tlo
Active Member
- Posts
- 558
- Location
- nottingham
I am sure you can get it cheaper but me thinks this is what you need
https://www.island-4x4.co.uk/fuel-pressure-regulator-repair-loom-ymq503320-p-6875.html
https://www.island-4x4.co.uk/fuel-pressure-regulator-repair-loom-ymq503320-p-6875.html
Philgt50
Well-Known Member
- Posts
- 242
- Location
- Bournemouth
Unplug the HP fuel rail connection, if it’s dirty or there’s any moisture fouling the connection really dry it out and clean it, then smear a thin bit of silicon grease on the sides of the plug so it is a moisture tight seal and plug it back together.
Mines been ok for 2 years since I did it. And am I a smug git or what?
Mines been ok for 2 years since I did it. And am I a smug git or what?
I've just posted a Thread, 'Fuel Rail Connector', which might be of interest to you.
Similar threads
