Fuel Pump advice needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I tell you why they have put gaffer tape around it because they were too idle to drill out the 2 rivets that are on the bottom of the fitting you drill them out then slide the whole thing out ,this has not been done so they have botched it. hope this helps and look at the pipe with the blue press clips on it has collapse on it self in the middle you would not get any fuel through even after bypassing the filter.
 
Hi Lightningad.
Hopefully the photo's below will help you understand where the pipe should fit, and as stated already the heat sensor mentioned maybe the earth connection, mine was broken when I came to changed my fuel filter, I had to make a repair until I could purchase a new connection,
 

Attachments

  • SDC16500.JPG
    SDC16500.JPG
    331.9 KB · Views: 153
  • SDC16501.JPG
    SDC16501.JPG
    315.9 KB · Views: 132
  • SDC16522.JPG
    SDC16522.JPG
    323.3 KB · Views: 140
  • SDC16662.JPG
    SDC16662.JPG
    316.5 KB · Views: 122
  • SDC16663.JPG
    SDC16663.JPG
    224.7 KB · Views: 137
  • SDC16672.JPG
    SDC16672.JPG
    274.9 KB · Views: 121
  • SDC16673.JPG
    SDC16673.JPG
    117.9 KB · Views: 126
  • SDC16681.JPG
    SDC16681.JPG
    228.9 KB · Views: 125
Back
Top