Series 3 Front Wings.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Chris, are you wanting the thread or the spanner size? Assuming the original AM605061 bolts are still there (if the wings have been off in the past, they may be replaced with metric stainless like the ones in rugbynut's link) then the socket size is 17/32 which takes some finding! I don't know what th thread is, but from memory, it's quite coarse to engage on the spire nut.
 
Just the socket size. I want to remove the wings. Original bolts. As far as I can see, with difficulty, they could be 12, 13 or 14mm.
 
wireman said:
17/32" is 13.49mm. 14mm would round off the head, 13mm probably wouldn't fit. 9/16" wouldn't be far off but again the risk of rounding the head off. If you could get hold of a 1/4" Whitworth socket that equates to 13.34mm and might be a better bet.

Conversion website here:
http://www.baconsdozen.co.uk/tools/conversion charts.htm
Click to expand...
Great. That is the info I was looking for. Could not find anything in the manuals.
Many thanks.
 
layfin said:
Great. That is the info I was looking for. Could not find anything in the manuals.
Many thanks.
Click to expand...
14mm or 9/16ths are perfect the holes are slotted so you only have to slacken them though you could remove them fully except top one ,it helps to start them first before fitting wing
 
If you own an old Land Rover, you really need a set of these:
https://www.toolstation.com/irwin-bolt-grip-nut-remover-set/p63045
I bought a set to remove calliper bolts on my 90 they were brilliant, I wondered how I'd not heard about them and how I'd survived so long without them. They do a metric set and an imperial set, I ended up buying both sets so I'm fully equipped when the need arises.
 
wireman said:
If you own an old Land Rover, you really need a set of these:
https://www.toolstation.com/irwin-bolt-grip-nut-remover-set/p63045
I bought a set to remove calliper bolts on my 90 they were brilliant, I wondered how I'd not heard about them and how I'd survived so long without them. They do a metric set and an imperial set, I ended up buying both sets so I'm fully equipped when the need arises.
Click to expand...

Yes I did the same and got both sets, not particularly cheap and not often used but when you do need them they're totally invaluable.
 
You must log in or register to reply here.

Similar threads

landowner
Series one grill Panel
Replies
3
Views
395
landowner
landowner
I
Series 2 Retirement
Replies
11
Views
864
Ian ath
I
A
Different rear wing length
Replies
2
Views
725
Bobsticle
Bobsticle
joerowelll
Series 3 Whats this part called?
Replies
2
Views
634
steve2286w
steve2286w
Gun7354
Front axle measurements
Replies
11
Views
808
steve2286w
steve2286w
Back
Top