front light guards

hi all, does any body have a drilling guide for fitting front light guards they could help me with. and how do you get the front lights out on a o2 td4 ?thanks. jas

Can't help you with the light guards, as I have the EGR Australian clear guards fitted (no drilling)

To get the complete headlamp units out you have to take the front bumper off to access the lower screws.

Can I ask why you want to take them out anyway if not to replace?

http://lz5zo.bfra.org/stc7962p1.jpg

http://lz5zo.bfra.org/stc7962p2.jpg

without the template its easy enough to be carefull and use the "lines" on the headlight glass to get it level.

Just beat me to it Cox325.

Do you folks have this website too?

TOPIx - TOPIx

silkwood said:

Do you folks have this website too?

TOPIx - TOPIx

Click to expand...

Been posting links to it for ages..... If only more folk would use it

Ok.

Is there not a prescription fee due up front before you can view though??

jrmroxx said:

Is there not a prescription fee due up front before you can view though??

Click to expand...

True - you can't access all of the info for free - but its still got loads of info manuals, and fitting instruction stuff that everyone can get.

Manuals for every Landrover ever made somone said.

Hoo-ah!

jrmroxx said:

Is there not a prescription fee due up front before you can view though??

Click to expand...

Some info does need a prescrition, but some don't. So I would say register and try.

All the accessory fitting guides and handbooks are free, well worth having to any new owners who have no idea where the switches etc are....

It's a good resource and a handy staring point for many answers

thanks cox325, going to tackle it soon, i like what you have done to your td4. jas

thanks mate, I got the links from here too ages ago, stick around this place is a font of knowledge!!!! I only know where and what the info is because of the fellows on this site. Even the ones that drift over from other areas to take the ****!!! after the **** take comes the answers!!!!

Plenty have done the drilling without the template, just be careful, tidy and you'll nail it.