GAZ68
Member
- Posts
- 40
- Location
- luton ,bedfordshire
hi got myself a 300 disco that needs front inner arches !! have been told i can rivet new ones in as they are not structural,does anyone know if this is right ?? thanks in advance
FRONT INNER ARCHES (Advice Please )
- Thread starter GAZ68
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
pm mad hat man he'll give ya the full sp
or just shout .......... DAFT!!!!!!!!! (its what everybody calls him
)GAZ68
Member
- Posts
- 40
- Location
- luton ,bedfordshire
Thanks for the quick response buckshot i will do ,cheers
- Posts
- 83,296
- Location
- Embasinga stocæ
yu called?
No you cant pop rivet them in - or more precisely the OS one is within 8 inches (is it 8?) of the brake servo and is therefore considered structural by MOT peeps.
yu mite get away with the NS one, but if yu gorra weld one, you might as well do the job proper and weld both.
You can get complete Inner wing sections (now :hurt from YRM for £60 notes each.
No you cant pop rivet them in - or more precisely the OS one is within 8 inches (is it 8?) of the brake servo and is therefore considered structural by MOT peeps.
yu mite get away with the NS one, but if yu gorra weld one, you might as well do the job proper and weld both.
You can get complete Inner wing sections (now :hurt
from YRM for £60 notes each.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
ya gettin deaf ya old get!
or did ya have to run from the garden (then have a breather before you sat down) :hysterically_laughi
or did ya have to run from the garden (then have a breather before you sat down) :hysterically_laughi
- Posts
- 83,296
- Location
- Embasinga stocæ
deaf?
old?
:kettlepot:
old?
:kettlepot:
GAZ68
Member
- Posts
- 40
- Location
- luton ,bedfordshire
Damn that was quick mad hat man ! thanks ,was just gonna pm ya when i had made a cuppa ! thanks again . will have to see if my brother still got his mig and will start practising !!!
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
- Posts
- 83,296
- Location
- Embasinga stocæ
be forewarned - if the inner wings are shot, then it appears quite likely that the footwells wont be far behind.
Have yu taken the carpets up and checked?
Have yu taken the carpets up and checked?
GAZ68
Member
- Posts
- 40
- Location
- luton ,bedfordshire
Cheers for that mate have checked footwells and rear floor (the usual places ) they seem fine a bit of rust but not rotten !!
chromiumuk
Well-Known Member
- Posts
- 2,203
- Location
- Earth
yu called?
No you cant pop rivet them in - or more precisely the OS one is within 8 inches (is it 8?) of the brake servo and is therefore considered structural by MOT peeps.
yu mite get away with the NS one, but if yu gorra weld one, you might as well do the job proper and weld both.
You can get complete Inner wing sections (now :hurt
£60, amazing. I remember many years ago when I had my classic RR these
things cost £250 each...........Anyhoo back to Freelandering
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
when i started on mi inner wings didnt seem to bad now replacing 2 inner wings including top hat ,battery tray,light box,both foot wells and the front door post
get yer outter wings of and cills of as well as the carpet up and get stabbing wi a screw driver its adicctive jist ask daft
get yer outter wings of and cills of as well as the carpet up and get stabbing wi a screw driver its adicctive jist ask daft
