Front bumper removal

C

C13tay1

Active Member

Posts

256

Location

standish, Lancs

• Nov 30, 2013

• #1

Just removing front bumper
Took off inspection covers from inside wheelarches

How many bolts on each side am I removing??

I can see 2 on each side which bolt into car and one on each side which I vertical into bracket

Which ones do I need to remove?

Thanks

Chris

 

Nodge68

Well-Known Member

Posts

33,181

Location

Cornwall

• Nov 30, 2013

• #2

One bolt each side on mine iirc and an array of screws.

 

C

C13tay1

Active Member

Posts

256

Location

standish, Lancs

• Nov 30, 2013

• #3

Thanks

Well if it's the verticle one..... It's just spinning and can't get it out!!!

 

RealBeale

Active Member

Posts

533

Location

Birmingham

• Nov 30, 2013

• #4

C13tay1 said:

Thanks

Well if it's the verticle one..... It's just spinning and can't get it out!!!

Click to expand...

Ok, so remove the bolts on the top of the wing.You should be able to prize the top of the wing enough to get at the spinning nut from above. There is a captive nut c-clip type fastener that Land Rover made from butter.If there is ANY rust in it , it will break and spin. I had to get some small grips on it from above to stop it spinning and undo the bolt from below.