Front Bulkhead

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

shinko

New Member
Posts
1
I have corrosion on the front bulkhead of my landrover county 1985 - 1. can this be repaired by welding?
2. How much would a replacement be inc labour
3.Would this syop me getting it through an MOT

Any help would be appreciated.
 
i think they can only fail you for a sharp edges , if it not to bad u get away with welding it up but need to rub it down and made it look better
 
Depending on where the corrosion is, and the severity of it, it's quite possible for it to fail the MOT.
If you're handy with a MIG welder you can buy/fabricate most of the common parts that rot.
Replacing the entire bulkhead is a fairly lengthy job - you can do it yourself in a couple of days, but if you're paying someone it'll probably cost as much as the Landy is worth.
 
I havent, but from what i've read on the million of threads about it when you search for that subject, looks like it's not a popular thing to do as the bulkhead warps
 
You must log in or register to reply here.

Similar threads

R
LRC 333 grey (SSF Grey) help!
Replies
0
Views
260
Rosie_1992
R
L
Rotten front cross member
Replies
11
Views
1K
Anaconda
A
mjr92
Horn and flash problem
Replies
12
Views
541
mjr92
mjr92
L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
4K
tottot
tottot
S
replacement bulkhead
2
Replies
37
Views
4K
Steg750
S
Back
Top