Front axle suspension travel stop

B

bdinsley

Member

Posts

64

Location

Coxhoe in County Durham

• Mar 29, 2010

• #1

The rubber bump stop that stops the axle from hitting the chassis when negotiating over big bumps has dropped off the chassis. It was originally glued to the underside of the chassis.

Any ideas on what sort of adhesive could be used to stick it back on?

Many thanks.....

Brian

 

G

gegs88

New Member

Posts

1,307

Location

wigan

• Mar 29, 2010

• #2

mine were bolted on, only cheap to buy

AXLE BUMP STOP RUBBER REAR ANR4189 Defender Discovery 1 Range Rover Classic

 

Dewin

Well-Known Member

Posts

4,912

Location

NE Wales

• Mar 29, 2010

• #3

As gegs88 said cheap enough to buy and easy to fit

Bump Stop TD5

 

Last edited: Mar 29, 2010

muddy wheeler

New Member

Posts

477

Location

essex suffolk border

• Mar 29, 2010

• #4

Bump stop td 5 £3-85 from Paddock,cheaper than glue!!!!!!!

 

B

bdinsley

Member

Posts

64

Location

Coxhoe in County Durham

• Mar 29, 2010

• #5

Thanks for the info gents. I see that they're less than £3 for a TD5 bump stop at Paddock.

Cheers,,,, Brian

 

D

David Pye

Active Member

Posts

623

Location

Newcastle Upon Tyne

• Mar 29, 2010

• #6

Yah, they aren't glued to the chassis, they're glued to a metal mounting plate, secured by a nut.

Just get the replacement, undo the nut, fit it and wind it back up.

I noticed one of my rear bump stops had gone AWOL while doing some work under there.

David