Freelander td4

E

Eddy1989

New Member

Posts

7

Location

Nottm

• Jan 30, 2017

• #1

Hi all. Had issues stating the freelander when engine was warm, took advise off here and changed the cam sensor when engine was up to temp ( after and hours drive) started first time! Next day same problem when cold turns over but doesn't quite go Any ideas? Cheers ed

 

Nodge68

Well-Known Member

Posts

33,579

Location

Cornwall

• Jan 30, 2017

• #2

First port of call for non staring TD4s is the high pressure regulator valve O rings. They are cheap and easy and will fail anyway, even if they aren't the cause right now.

 

Madmustang

Well-Known Member

Posts

1,672

Location

Castleford

• Jan 31, 2017

• #3

Eddy1989 said:

Hi all. Had issues stating the freelander when engine was warm, took advise off here and changed the cam sensor when engine was up to temp ( after and hours drive) started first time! Next day same problem when cold turns over but doesn't quite go Any ideas? Cheers ed

Click to expand...

How did you get it up to temp if it didnt start?

 

E

Eddy1989

New Member

Posts

7

Location

Nottm

• Jan 31, 2017

• #4

Sorry probably not worded well. The car was starting fine cold but wouldn't turn on when engine warm! I changed the cam sensor when the engine was warm and it started first time. The next day wouldn't turn on cold