Freelander front light gaurd grommet

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dangermike

Dangermike

Active Member
Posts
482
Location
Benfleet Essex
Hey guys

As nice does anyone know what size I need?

The hole according to the instructions says I need to drill an 11mm hole,

Are grommets in set sizes?
 
CB40 said:
Did you know you can get these that fit without any drilling? I've had them on my Freelander for 22 months without any problems.

Sorry, I know that doesn't answer your question ....
Click to expand...

:nopics: kindly elaborate please:D (through pm so as not to hijack thread) sorry op
 
Last edited:
I also have the clip on light guards, no need for drilling any holes and they actually fit the lights rather than extending round the body like the other ones. There's always some on Ebay if anyones interested.
 
you only need the gromets for the points that go into the bumper and make sure that you put the light gaurd into the bumper first before marking the wings as some idiot did on mine ,now they are just about holding in the bumper, as the holes on the wings are a bit to far back.
 
On the grommets I have for my guards the hole in the grommet is 6mm, part that fits in the hole you drill is 10mm and the outside diameter is 14mm.

I need to get my hands on 2 of the spacers, the long one for the rear lights and one for the front lights that spaces it out from the wings.

Got to agree, I don't like drilling into perfectly good bodywork but hadn't seen the clip on ones until yesterday.
 
mfp2gosling1 said:
On the grommets I have for my guards the hole in the grommet is 6mm, part that fits in the hole you drill is 10mm and the outside diameter is 14mm.

I need to get my hands on 2 of the spacers, the long one for the rear lights and one for the front lights that spaces it out from the wings.

Got to agree, I don't like drilling into perfectly good bodywork but hadn't seen the clip on ones until yesterday.
Click to expand...

Perfect thanks!

I shall look in for somewhere to buy them tonight!
 
You must log in or register to reply here.

Similar threads

Madmustang
Freelander 2 (LR2) Freelander 2 brake grommet part number?
Replies
4
Views
485
Madmustang
Madmustang
M
Front bumper fog light blanks
Replies
0
Views
470
MarkyT288
M
Kerlaan
Freelander 1 Towbar fitment [solved]
Replies
7
Views
774
Kerlaan
Kerlaan
E
Help removing broken front Indicator holder.
Replies
5
Views
921
GrumpyGel
GrumpyGel
malcolm_durant
RESOLVED: Early Freelander 1: dash-mounted cupholder - retaining "locknut" part number or equivalent?
Replies
4
Views
931
Nodge68
Nodge68
Back
Top