- Posts
- 83,230
- Location
- Embasinga stocæ
Pull the fuse from position 5 for a few seconds, that resets the FBH in case it's had a flame out, after 3 lighting attempts it locks out and pulling the fuse resets it.
Freelander FBH (Fuel Burning Heater) Reset Procedure
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wazimu0
Member
- Posts
- 44
- Location
- Centre of Britain!!!
Hi Mad Hat Man,
My FBH hasn't worked since I bought the car, but my fuse 5 is for the starter motor???
Is it the set of fuses inside the glove box under the steering wheel you are talking about? I think I've found 3 fuses so far that say they are fuse 5.
My FBH hasn't worked since I bought the car, but my fuse 5 is for the starter motor???
Is it the set of fuses inside the glove box under the steering wheel you are talking about? I think I've found 3 fuses so far that say they are fuse 5.
- Posts
- 83,230
- Location
- Embasinga stocæ
have you looked on Rave 
wazimu0
Member
- Posts
- 44
- Location
- Centre of Britain!!!
Glovebox Fuse 5 (Starter Motor)
Engine Compartment Fuse box, Fuse 5 (Engine Management, Transmittion cooling fan)
Suplementry Fuse box, Only has 4 fuses.
Engine Compartment Fuse box, Fuse 5 (Engine Management, Transmittion cooling fan)
Suplementry Fuse box, Only has 4 fuses.
wazimu0
Member
- Posts
- 44
- Location
- Centre of Britain!!!
OK, think I'm getting somewhere, is it the 20amp Fuse in the engine compartment fuse box? When you say remove it for a few seconds, is this with the enging running or not???
Thanks, sorry for being such a pain.
Thanks, sorry for being such a pain.
- Posts
- 83,230
- Location
- Embasinga stocæ
No idea - it was a cut n paste procedure...... bit if you can add to it, that would be very useful
