Freelander Brake Clip Kit pre-2001?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Wonk

Active Member
Posts
67
Location
Bristol
Planning a brake rebuild and looking some new brake clips on my Freelander. It's an older 1999 model so parts seem to be getting trickier to find. I can find part number SFK500010, but most listings say it is for VIN 1A000001 onwards.
https://rimmerbros.com/Item--i-SFK500010
Does anyone know if these will fit?
 
The link you posted is for the later vented discs. Solid discs use different pads and calipers. Can't find a picture butbrhe clips you show won't fit. Clips can usually be reused but not sure what yours looks like. Have got a set of pre 2000 pads if you want them !
 
Thanks, I thought that might be the case. I have a set of pre 2000 pads and discs. Made that mistake before! The clips are a little worse for wear and I think a contributing factor to a pad sticking, causing me to have to do this job again a bit early.

Do you happen to have a part number or source for pre 2000 brake clips?
 
Back
Top