Freelander 2 air conditioner

Hi Guys

I've just been to ATS for an air con re-gas, which didn't change anything

When I turn on the air con, the switch lights up, the fan blows harder but the air doesn't cool down at all. The guy at ATS tells me it could be a relay or a sensor

Any suggestions?

Many thanks in advance

Is the clutch engaging? Have you checked for error codes?

Hi, thanks for your response, how do I do this? I'm a total novice

That's pretty poor, do you say that ATS recharged the gas and didn't actually test the system?

They tested the system in that its not leaking

Yep, had it filled at ATS

I notice there's an electric plug dangling loose, I wonder if I accidentally knocked it loose when I changed the oil filter last week. If so, does anyone know where it connects, I've had a good look and feel around, I can't find anywhere it would click into

Looks like the other end of the plug is still plugged in!?
The wire is only short so there can only be a few places it will reach...

I know but I'm dammed if I can find it

Could be to a pressure switch for the AC, but looking at the diagram this is near the bulkhead

AC pressure switch

Mikedodd said:

I know but I'm dammed if I can find it

Click to expand...

If you want to do your own maintenance and repairs, you need a decent code reader at the very least.

Does the radiator fan start turning when the air con is switched on?