Scottjamesilsley
New Member
- Posts
- 7
- Location
- Coventry
Hi my freelander xei 1.8 54 plate is making a vibration when i get to 2300rpm and goes when i get to about 3000rpm
Freelander 1 xei 1.8 2004
- Thread starter Scottjamesilsley
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
saxavordian
Well-Known Member
- Posts
- 8,465
Welcome to the forum. Might be worth having a diagnostic tool to rule out any issues first. Are the vibration through the steering as worn brakes can have effect by or the vcu.
Alibro
Well-Known Member
- Posts
- 7,022
- Location
- Northern Ireland
Can you tell approximately where it's coming from?
Is it on acceleration only or even when staying at a steady speed?
Is the speed relevant, ie what gear are you in when it happens?
Is it a high pitched vibration or a throb?
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
Is it there when you rev the engine in neutral?
Scottjamesilsley
New Member
- Posts
- 7
- Location
- Coventry
Yes it is and i seem to change gear sooner like i could be in 4th doing 30mph sure thats not right..some body help thank you
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
Have you taken it to a decent garage to get it checked out?
A vibration is often very difficult to diagnose when the vehicle is present, let alone over the internet.
A vibration is often very difficult to diagnose when the vehicle is present, let alone over the internet.
Alibro
Well-Known Member
- Posts
- 7,022
- Location
- Northern Ireland
I got a vibration after changing the engine mounts to poly. Can't remember what rpm tho.
You didn't answer my earlier questions.
What's wrong with being in 4th at 30?
Alibro
Well-Known Member
- Posts
- 7,022
- Location
- Northern Ireland
Oops double post.
The servers seem to be struggling for some reason.
The servers seem to be struggling for some reason.
Last edited:
