mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Thanks is that easy to change? I am going to start doing the work myself I think.
Freelander 1 TD4 Sport new/recon VCU Now leaking!!
- Thread starter mikey7985
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,310
- Location
- Embasinga stocæ
if yu ask nicely 
mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Lol
mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Sorted New Prop shaft fitted F.O.C
WELL DONE L.A.S BANGOR
:kiss:
WELL DONE L.A.S BANGOR
:kiss:
Great news..........My biggest concern is that from your break down of the bill they don't seem to have changed the crank case breather!.
Now unless you have the modded BMW cyclone unit fitted...this MUST be changed at every service else you risk blowing your turbo and having the engine run away on you.
Now unless you have the modded BMW cyclone unit fitted...this MUST be changed at every service else you risk blowing your turbo and having the engine run away on you.
mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Thanks I will get that done ASAP
mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Cyclone upgrade fitted
Spacemonkey...
Well-Known Member
- Posts
- 1,048
- Location
- Darzet
Easy job and worth doing!
mikey7985
New Member
- Posts
- 374
- Location
- North Wales
Does it need replacing at every service?
Spacemonkey...
Well-Known Member
- Posts
- 1,048
- Location
- Darzet
Some say the cyclone filter can be left and forgotten about, but others say it needs cleaning out as well, but at least it shouldn't clog up too much like the old sort. My advice would be to check it next service and the one after that and make your own mind up. Personally I will check mine every year but I do about 40k a year. Not hard to whip it out every now and then.
