Freelander 1 TD4 help

ronseal · May 12, 2013

Hello everyone, just purchased a 2003 freelander TD4 and was wondering if anyone could help with a couple of faults I have found since getting it back.
1. when using the alarm fob to lock and unlock the car it only locks it, it wont unlock the front doors - does unlock the boot door, and you can hear it try to unlock the doors but the pin doesn't pop up...i was thinking solenoid but it seems to work one way - - any ideas
2. the guy i got it off fitted a new fuel pump but now the fuel guage reads backwards - I was thinking he may have plugged the plug the wrong way around but after speaking to him he said it wasnt possible as the plug only fitted one way - is this correct or can i just locate it and swap the wired round
3, now the slightly worring bit - when reving up and changing from 2nd to 3rd there seems to be a clonk every so often from the front feels like its near the pedals, I know the diff mounts can go on these as it has been used to tow (hopeing were not looking at the gearbox) it doesnt seem to do it all the time or when changing between any other gear

finnaly anyone have any advice on things to check / change and upgrade to ensure this lives a long a fun life..

im pretty handy with a spanner and happy to get my hands dirty so anything would be good, already looking into a facelift conversion

im missing my Rangie already - maybe i should have stuck with that

hd3 · May 12, 2013

1. when using the alarm fob to lock and unlock the car it only locks it, it wont unlock the front doors - does unlock the boot door, and you can hear it try to unlock the doors but the pin doesn't pop up...i was thinking solenoid but it seems to work one way - - any ideas

a site search should reveal snippets of info on that ..
over time .. corrosion of indoor wiring is somewhat of a general problem ..
i.e. speaker wiring .. window cables .. and no doubt the locking system ..
( not had the problem myself .. 'xcept for a corroded speaker connection )

2. the guy i got it off fitted a new fuel pump but now the fuel guage reads backwards - I was thinking he may have plugged the plug the wrong way around but after speaking to him he said it wasnt possible as the plug only fitted one way - is this correct or can i just locate it and swap the wired round

if the fuel gauge sender unit was disconnected .. it could have been re-connected backwards .. am fairly sure someone else here had the same problem ..
( site search again

3, now the slightly worring bit - when reving up and changing from 2nd to 3rd there seems to be a clonk every so often from the front feels like its near the pedals, I know the diff mounts can go on these as it has been used to tow (hopeing were not looking at the gearbox) it doesnt seem to do it all the time or when changing between any other gear

rekon i'd be looking at engine / gearbox mounts .. to start with ..
( do a site search for "clonk" or similar ..
( as like same from rear end .. diff mounts and rear subframe bolts ..
( the subject of front end clonks / knocking noises come up now and again

**************************************************************************

on things to check / change and upgrade to ensure this lives a long a fun life..

gstuart · May 12, 2013

hd3 said:
a site search should reveal snippets of info on that ..
over time .. corrosion of indoor wiring is somewhat of a general problem ..
i.e. speaker wiring .. window cables .. and no doubt the locking system ..
( not had the problem myself .. 'xcept for a corroded speaker connection )

if the fuel gauge sender unit was disconnected .. it could have been re-connected backwards .. am fairly sure someone else here had the same problem ..
( site search again

rekon i'd be looking at engine / gearbox mounts .. to start with ..
( do a site search for "clonk" or similar ..
( as like same from rear end .. diff mounts and rear subframe bolts ..
( the subject of front end clonks / knocking noises come up now and again

**************************************************************************

freelander1 info for newbies :

http://www.landyzone.co.uk/lz/f38/freelander-everything-you-need-know-46437.html

http://www.landyzone.co.uk/lz/1620217-post9.html

http://www.landyzone.co.uk/lz/f9/noob-q-buying-214443.html

~~~

explains the 4wd system ..

Symptoms - Bell Engineering

WHAT DOES MY FREELANDER’S VCU DO? | For Land Rover Enthusiasts

~~~

some points about buying a hippo1 that's been reduced to 2wd / had the props-vcu removed ..

http://www.landyzone.co.uk/lz/2473365-post28.html

~~~

various bits of tech. info re. freelander'1'

Freelander - Fix problems, repairs, diagrams, whats wrong, faults, upgrates - Land Rover

~~~~~~~~

L - series diesel tuning
http://www.landyzone.co.uk/lz/f57/l-series-tuning-guide-174487.html

~~~~~~

TD4 specific :

ROVER 75 MGZT ENGINE FAULT FINDING

Maf sensor problems.

freelander td4 mpg
http://www.landyzone.co.uk/lz/f9/mpg-my-td4-results-181789.html

http://www.rover-club.net/graphics/manuals/16/m47r_diesel.pdf
( does not include info. re. the variable vane type turbo )

td4 engine modifications :
do a LZ site search for ..
" EGR bypass / delete "
" BMW crankcase breather / separator "
" silicone intercooler hoses "
" Synergy tuning module / box "
" remap / remapping "

" 2-stroke oil in fuel "

be sure to check the turbo-vent filter condition ..
as it's often overlooked ..
If it gets clogged up ( or in some cases removed ) .. damage to the turbo-actuator solenoid may result
and the turbo vanes will fail to operate properly

~~~~~~~

http://www.landyzone.co.uk/lz/f69/2004-freelander-1-sales-brochure-specification-197513.html

http://www.landyzone.co.uk/lz/f69/2001-freelander-1-sales-brochure-specification-195912.html

~~~~~~~~~~~

( various LR vehicles ) .. Common Faults and Questions:
Common Faults and Questions - Land Rover Zone

~~~~~~~~~~~~

re: turbochargers .. ( not LR specific )

turbochargers .. oil circulation / crankcase breathers / air filters ..
http://www.approvedturbo.com/articles/ATC-Oil-Leak-Troubleshooting.pdf

Turbocharger Maintenance 101

http://www.team-bhp.com/forum/techn...-practice-idling-rule-turbo-charged-cars.html

~~~~~~~~~~~~~~~~~

fuel and injectors / h.p.pumps ..

News :: How clean is the diesel fuel in your tank? - Diesel Injectors UK, Buy Diesel Injectors Online, UK Sales & Online Shopping

News :: Injectors are at the heart of your diesel - keep them clean! - Diesel Injectors UK, Buy Diesel Injectors Online, UK Sales & Online Shopping

A poor quality filter could be a hidden enemy in your engine | Diesel Injectors UK

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

injector internals
Bosch TOP4 CR Piezo Injector video - Teknik Dizel - YouTube

How Bosch Piezoelectric Diesel Injector Works
How Bosch Piezoelectric Diesel Injector Works - YouTube

~~~~~~~~~~~~~~~~~~~

one additive that combats water-in-diesel ( and diesel bug ) be 'diesel rhino' :

Diesel Fuel Additive | Diesel Rhino - United Diesel, Shropshire

Diesel Rhino

http://www.dieselrhino.co.uk/DR_Prod_Desc.pdf

http://www.dieselrhino.co.uk/Diesel_Rhino_CHIP.pdf

~~~~~~~~~~~~~~~~~

about 'diesel bug' ( bacteria )

info ..
The Diesel Bug

re. diesel bug .. be the slime/jelly-like substance in this sedimenter ..
http://www.landyzone.co.uk/lz/1881953-post2.html

diesel bug and injectors ..
http://www.uniteddiesel.co.uk/tips_docs/Problems with fuel.pdf

~~~~~~~~~~~~~~~

great post are we able to have this as a sticky please cause it covers virtually everything

gary

hd3 · May 13, 2013

cause it covers virtually everything

'xcept for

auto gear box faults
i.8 & kV6 engines
( would have add a post collection from various well known LZ owners/experts for them

'n some more info regarding the L-series

and 'water-in-the-boot' 'n 'tailgate-window-rear-door-latch-don't-work' posts ..

and the 'VCU' discussion post ..
the list could go on .. and on ..
~~~~~~~~

hd3 · May 13, 2013

so anything would be good, already looking into a facelift conversion

' modded hippo thread '
http://www.landyzone.co.uk/lz/f9/modded-hippo-thread-223084.html

( unfortunately 'winu's modded-hippo thread was deleted .. due to some nasty gremlin data occurence of somesort )

crockett007 · May 13, 2013

Hi

The door lock issue is the central locking mechanism....... just changed my drivers side one. Sounds like you need two

You can get them, used, from fleabay....... I wouldn't recommend it though because you don't know what you're getting. I would buy new. They are about 70 - 90 squid each, not cheap. And having small hands will be a definite plus when fitting them........... something I don't have!!

Good luck with your FL, I love mine, despite it's flaws.

ronseal · May 13, 2013

Cheers guys, looks like i have a bit of reading to do.......

ronseal · May 13, 2013

anyone know where i can get the Rave CD for the freelander, preferably for free....

hd3 · May 13, 2013

anyone know where i can get the Rave CD for the freelander, preferably for free

land rover service factory manual RAVE download land rover resource, service manual, workshop factory manual, download, rave, vehicles including discovery, series, defender, range rover, freelander, LR3, Handbooks, Catalog, Catalogue, Land Rover Inte

~~~~~~~~~~~~~~~

can't say 'owt about it .. as my comp. won't co-operate with the files ..
besides it don't cover my year vehicle

~~~~~~~~

there's this site as well .. you need to register to get beyond the 'owners manual' ..
http://topix.landrover.jlrext.com/topix/i18n/index

ronseal · May 20, 2013

has anyone downloaded from the first RAVE link as my virus software goes crazy when i try...not sure if i should proceed and just risk it....

essexpestcontrol · May 20, 2013

have you tried new batteries in the fob, sounds weird that it will lock but not unlock, you say you don't see the button pop up, neither do I, but the door unlocks ok

ronseal · May 20, 2013

tried new batteries, no help unfortunatly....

it wont start now so bigger fish to fry.....starting to regret getting a freelander

my experiance with the freelander isnt great so far....never had any of these issues with my Range Rover, 3 years pretty much problem free....haven't even managed a week with this and its died....

I did enjoy the 4 days it actually worked...

Dbest43 · Aug 12, 2021

Regarding your fuel gauge reading backwards he's probably changed the fuel sender unit fitted in the tank you've 2 different versions one has to connection prongs and the other has 4 , I've got the same problem and I now 100% it's the wrong sender unit you can tell by just unplugging it if you've 2 wires on the plug then there should be 2 on the sender

Freelander 1 TD4 help

ronseal

New Member

hd3

Well-Known Member

gstuart

D3 Grandad

hd3

Well-Known Member

hd3

Well-Known Member

crockett007

Active Member

ronseal

New Member

ronseal

New Member

hd3

Well-Known Member

ronseal

New Member

essexpestcontrol

New Member

ronseal

New Member

Dbest43

Member

Similar threads