Freelander 1.8 petrol cam sensor fault

Hiya guys, not posted for a while...
Making good use of lockdown...
Hope you are too...

I have a faulty cam sensor problem that's doing my head in!
Typical symptoms: starts from cold ok, though tickover a little erratic... Performance is obviously a little sluggish... Doesn't like to restart...

Diagnostics (Hawkeye): code P0341 - cam sensor fault. Live data: cam sync: Lost.

This continues to be the case despite changing the sensor 3 times, and even changing the engine bay wiring loom!
I've carried out a static test with a multimeter on each of the cam sensors I've had - readings from earth to Red, and then to Green sensor wires hold to a steady approx. 12v and 10v respectively (with ignition on). No drop in voltage when the sensor is in contact with something metal.

Any ideas??? Please!???

Hi,

I'm having a similar issue on my freelander not the exact same symptoms but my Hawkeye says the same changed the sensor twice
have not replaced the loom

but tomorrow we are going to get the multimeter at the sensor plug and the ecu to check the connections, see if there's a break somewhere?
and maybe check the cam positions and timing belt

maybe you could try the same?

Sorry that's the best I've got at the moment, Trying to rundown this issue myself