Fixed

Just fix my freelander replaced the up lift pump now out of limp mode but engine light still on ?

Probably best to plug in a code reader to see what it thinks is wrong. Might just need a code clearing, but probably it thinks there's something else wrong.

GrumpyGel said:

Probably best to plug in a code reader to see what it thinks is wrong. Might just need a code clearing, but probably it thinks there's something else wrong.

Click to expand...

Ive got a new fault code meter on its way it should clear it

Julian 75 said:

Ive got a new fault code meter on its way it should clear it

Click to expand...

Depends on the year of the vehicle. Not all code readers can access all years of FL1.
Edit
If it's the FL1 in your avatar, then it's not going to be OBD2 compliant. You'll need a dedicated FL1 code reader like the Hawkeye or Icarsoft I930.

What year is your FL? I *think* its only 2001/2002ish onwards that support eobd/obdII unless its something designed specific for the FL which can be expensive.

Geodark said:

What year is your FL? I *think* its only 2001/2002ish onwards that support eobd/obdII

Click to expand...

Not the TD4. That engine wasn't OBD2 compliant until late 2004, and then it's not fully compliant.

Pre-2004 needs a dedicated FL1 code reader like the Hawkeye or Icarsoft I930.