Fitting side window.

Went out lamping this eve and had a tree branch punch out my nearside rear side window. Easy fix? Planning on going to the scrapper as they`ve had a few discos in of late.
How easy is it to remove a window then refit in my vehicle. Looked on Paddocks and couldnt find a price for new, or the window i want on their searcher.Is it economically sensible to buy a new one?
200tdi

Cheers Guys.

its easy, you dont even need to remove the door, the top frame around the window comes out and allows to slide the window up and out..

there's 2 bolts near the door lock, i think there's another on the front..have a look, I cant remember exactly where the bolts are, but it's an easy job

doesn't he mean the side window in the load area, not the door window?

Richard Martin said:

doesn't he mean the side window in the load area, not the door window?

Click to expand...

Thats the one martin. I`m off up the scrapper now. I`ll just cut it out with a stanley knife and see how i go.

wastegate said:

Thats the one martin. I`m off up the scrapper now. I`ll just cut it out with a stanley knife and see how i go.

Click to expand...

they just pop out and pop back in no hassle

300tdistu said:

they just pop out and pop back in no hassle

Click to expand...

Sweet. Just got back. Took about 10 mins to slice it out.

I`m thinking glass goes in rubber then the whole lot is pushed in.

Its in. Rubber first then push the glass into the top, which leaves only half the glass to get in. I ran round it with a pointed piece of + section plasic covered in fairy.

a peice of string is what ya need lads......good strong string place it in the rubber groove where the body will be ( obviously after youve fitted the rubber round the glass)
best to stop n start ya tails in the corner... present the glass from the inside to one corner to start it keep the tails of the string on the outside... get ya mate to push on the glass as you slowly pull the tails towards you... this will lift the rubber edges n glass will go in smoothly.... no wedgin no pokin ( usually with a screwdiver to hand) and therefore no trips back to scrappers... for another peice of glass
arca