Fitting light guards p38,,,,help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

bricko

New Member
Posts
44
Hi,
Can someone enlighten me to the tool used in the diagram to fit the rear light guards on my p38 in the picture it looks like a pop rivet gun, but these things there are eight of them i have to use looks like i drill a 7mm hole and push these in and i think used the same method as pop riveting but it looks like i do not have this tool what do i need to buy to use these small rivet looking things,,,,thanks for any help
 

Attachments

  • P3278941.JPG
    P3278941.JPG
    58.7 KB · Views: 264
  • P3278939.JPG
    P3278939.JPG
    17 KB · Views: 293
Irishrover said:
Jaysus Buster..where have you been. Thought you had left home !!!!
Click to expand...

Nah, not yet mate;) Tooo much goin' on just now... need a new chassis fur starters. Got home the other day tae find about 15 tons o' slate sittin' fur me new roof (more tae come!) Bin tryin' tae find space fur the scaffold tae go up, it's just never endin' the now!:doh:;):D
 
Just fitted a front & rear set to my P38, you need a 'Thread Setter Tool, looks like a rivit tool, If you buy a kit you should get 4 different size mandels, Klick Rivit nuts & Poly Nuts.
With the template it took me about 3 hours, you have to take the rad grille off for the front ones. Rear ones are easy. You need to use a 1ml size drill bigger that the rivet nuts. Enjoy
 
You must log in or register to reply here.

Similar threads

S
Trouble attaching lid of heater matrix
Replies
3
Views
398
steve2286w
steve2286w
F
P38 DSE loss of power when driving
2
Replies
34
Views
2K
Tibo W
T
norseman
RRC speedo
Replies
16
Views
772
norseman
norseman
jimmacD
P38 Driver's external door handle?
2 3
Replies
52
Views
4K
TheTree
T
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
718
Mark Piercy
Mark Piercy
Back
Top