Fitting chequer plate onto FFR ex-mod landy

Boris113 · Jan 19, 2011

Hi guys, I'm doing some work to an ex-mod land rover 90 FFR for a family friend, he wants chequer plate fitting to the wings but they still have small boxes about 6x6" and an inch tall on each wing. I dont have the landy here to check but how are these boxes attached?

This link should show a 110 with the same style boxes.
http://www.ukemergency.co.uk/police/dscd0121.jpg

Thanks, Harry

sypher · Jan 19, 2011

normally bolted up through the wing tops ( if he dont want them can I have first dibs

)

lr110 · Jan 19, 2011

dont do it!!!!!! tell him to buy a civvy one if he wants to put checker plate on it

bigcarorguk · Jan 19, 2011

Is there a template anywhere for the wing tops? So I can have my local fabricator cut some?

wiltshire landyman · Jan 19, 2011

bigcarorguk said:
Is there a template anywhere for the wing tops? So I can have my local fabricator cut some?

make one:doh:

Badger · Jan 20, 2011

use some 9mm plywood to mark out the basic shape of the wing tops, then cut to exact shape using a circular saw & jigsaw.

Should take you an hour or so and drop it off to the fabricators, at least you'll know the shape and measurements are exact.

Boris113 · Jan 21, 2011

I did tell the bloke it was a shame to fit chequer plate but he wants it doing

Sypher I will ask him and if he doesn't want them then thats not a problem.

Are the boxes for radio ariels or something else?

Harry

lr110 · Jan 21, 2011

they are for the ariels look at the emlra website for pictures

Fitting chequer plate onto FFR ex-mod landy

Boris113

Well-Known Member

sypher

Well-Known Member

lr110

Well-Known Member

bigcarorguk

Member

wiltshire landyman

I’m back

Badger

Well-Known Member

Boris113

Well-Known Member

lr110

Well-Known Member

Similar threads