Fitting additional AMP and SUB-WOOFER!?!?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

stefan063

New Member
Posts
50
Hi guys,

I have one problem that is related to fitting aditional amp and sub-woofer!
I have instaled all,connected amp signal to input signal that goes from navi to amp,and amp and woofer are working...Only thing is that I cannot control volume of the sub-woofer of volume knob on navi wich we all use to lower or push the volume to the limit :D

Is it possible that there goes the fixed sound signal and is not possible to control volume of the woofer???

Regards
 
sounds like you have spurred off the wrong cable.

have you connected onto a speaker output and then fed that into the high level input of your subs amp ?
 
sounds like you have spurred off the wrong cable.

have you connected onto a speaker output and then fed that into the high level input of your subs amp ?

You think that I have to connect amp with woofer not input signal that is located on RR amp?
 
You think that I have to connect amp with woofer not input signal that is located on RR amp?


in english ??? lol

i fitted an amp and sub to mine but i fed a phono feed from the headunit as i have an aftermarket headunit with a subwoofer out.


but to be able to get the volume control to work i think you need to splice off one of your speaker outputs and connect it into the high level input on your amp (if it has one)

take a pic of your setup and amp so we have a better idea.


heres mine :)


IMG_0664.jpg




changed the speakers to aftermarket jobbys :D much better :p

IMG_0010.jpg
 
Last edited:
THX 2.0_hippo ... I have something different in mind... I have done different! :) I will post my pics tomorrow and you will see what I had in mind!? Thanks once again!!!
 
Back
Top