Fitting a Front Right Hand Sensor?

Hi all,

I have recently run eas unlock for the suspension on my p38a. The front right of the bonnet is always pointing further down than it should be and running the diagnostics confirmed that its the FR Signal Error.

I have looked the part up and was just wondering how easy it was to fit a new front right sensor or is it worth taking it to a garage?

Cheers, Keith

a piece of p#ss if you have some spanners

Dead easy to fit, a small socket spanner and some plus gas to free the bolts. Remember to leave the boot or a door open to freeze the suspension and after you may need to calibrate that sensor. But first check that it's not just a corroded connector.