Fitting a boost gauge. Simple? Nope. Fail!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
palace said:
new to landies, I have just cursed and sworn as i took the pipe off saying you were a no nothing fu.......... well you ge t the drift I pulled the last piece of tube off and YOU WERE RIGHT! I was wrong i totally appologise and have llearnt something i should know already, "if you ask some one that knows check becausre they do" many thanks and no doubt i'll be back when i scrw something else up

Mark
Click to expand...

i know my username is new2landies but i have learnt a thing or two in the last month from the forum and working on mine, they are certainly different from any other car :) i still need to learn alot more but happy looking at the forum and reading other peoples posts for advice :)


incidently i went out in the snow too take the pic of the wastgate pipe, as i thought you needed help, i used to take everything off, then find out i had to refer to the forum for more advice with everything apart, i changed my strategy as i was always on pins until someone replied, now i read...read...then read some more, to make sure i understand everything about the job before i undertake anything, the new strategy works well :D
 
Last edited:
Yay me again :) poxy T supplied with the kit is too small off to the motor company in the morning :(
 
You must log in or register to reply here.

Similar threads

R
Series 3 temperature gauge help required
Replies
6
Views
471
R Morris
R
B
TD5 Temp gauge drops to 1/4
Replies
3
Views
288
Bugz
B
J
D2 Faulty Fuel Gauge?
Replies
3
Views
525
john snoo
J
S
The four amigos and fault 85
Replies
2
Views
273
Spuddo
S
OscarBoy
300 Tdi Temperature Gauge not working, maybe?
Replies
8
Views
313
OscarBoy
OscarBoy
Back
Top