First couple of questions for you guys

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

AGray

New Member
Posts
6
Location
Aberdeenshire
hi Guys here’s a couple of questions from me it’s about my Disco II TD5 GS 2003 model :
(1) even if my gearbox is in low ratio when I engage ‘downhill decent’ the light flashes anD ‘bongs’ at me is there a switch that tells the car it’s in low ratio ? As I suspect it doesn’t realise it is ? Traction control and ABS all work okay
(2) both rear wheel arch liners that also support the rear mud flaps have rotted away and I need to replace them , had a very quick look but how are these panels fitted to the Disco are thy riveted or bolted ? I have bought a new set of galvanised ones .

Any ideas/comments/hints/ tips

Alan
 
Does it bong 3 times when you first press the switch? Sure that's fine if it does. Handbook should know ;)

Inner mud flap bracket is combination of rivets and screws, just drill out or chisel heads off and use nuts and bolts to refit. Mind the acual inner arch isn't rotten as well it's a right mud trap
 
upload_2018-10-7_18-12-17.png
 
1988smithy said:
Does it bong 3 times when you first press the switch? Sure that's fine if it does. Handbook should know ;)

Inner mud flap bracket is combination of rivets and screws, just drill out or chisel heads off and use nuts and bolts to refit. Mind the acual inner arch isn't rotten as well it's a right mud trap
Click to expand...
Smithy
It just keeps ‘bonging till you turn the switch off , and thanks for heads up on inner wheel arch/mudflap mount
 
You must log in or register to reply here.

Similar threads

Dr LC8
Disco II 2003 Diff Lock
2
Replies
20
Views
8K
bobupndown
bobupndown
Back
Top