Finally have an eas problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well if u need it what can you do? And it's cheaper than a new unit! Compressor is sat on kitchen table now waiting for the new bits to arrive
 
ARRRRGGGHHHHHHHHH

so i took the pump apart today and could see the problem straight away, the seal around piston was fooked! Took piston out and when moving the pump about i could hear a rattle from other end, curious i took it off, and found one of the bushes had broke off. So now its completely ####ed, not a happy bunny. Why does it always happen when most skint.Work needs to pick up quick!
 
ARRRRGGGHHHHHHHHH

so i took the pump apart today and could see the problem straight away, the seal around piston was fooked! Took piston out and when moving the pump about i could hear a rattle from other end, curious i took it off, and found one of the bushes had broke off. So now its completely ####ed, not a happy bunny. Why does it always happen when most skint.Work needs to pick up quick!

Should be able to source new brushes with a bit of effort.
 
ARRRRGGGHHHHHHHHH

so i took the pump apart today and could see the problem straight away, the seal around piston was fooked! Took piston out and when moving the pump about i could hear a rattle from other end, curious i took it off, and found one of the bushes had broke off. So now its completely ####ed, not a happy bunny. Why does it always happen when most skint.Work needs to pick up quick!

Should have asked kurtjohnson if he had a new pump, sometimes he has one in the sale section, cheaper than anywhere else
 
Yeah I have. He pm'd me the other day. 100 quid delivered so can't complain. Just come at a bad time.

That's the state of piston. Surprised it never gave up before!
 

Attachments

  • DSC_0229.jpg
    DSC_0229.jpg
    163.8 KB · Views: 153
Last edited:
I did mine just before xmas. The piston seal on mine had disintigrated into powder. No faults, just struggled to raise. Kit from Symilise & all good again.
 
All done, new compressor on! happy days. still need to do diaphragm but that can wait for a warmer day.its bloody cold today!
 
Tested it suspension going up, pump not running constantly. Seemed to have developed an idle problem as well now. Typical!
 
Back
Top