1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Freelander 2 (LR2) Fault code p2562

Discussion in 'Land Rover Freelander' started by Jules2409, Dec 8, 2019.

< Previous Thread | Next Thread >
  1. Jules2409

    Jules2409 New Member

    Joined:
    Dec 7, 2019
    Posts:
    6
    Likes Received:
    0
    Location:
    Abergavenny
    Can someone please help to advise the solution to this fault code? My car goes into limp mode whilst the engine is in idle position, waiting at traffic lights or a roundabout, it re-sets when I stop, remove the key then start again. Really need some good advice as to what the actual fault could be before spending a fortune. I tow my horse trailer and can't do that until this fault is fixed as it is quite dangerous to have 1600kg behind you with no power

    thank in advance for quality advice
     
  2. Jules2409

    Jules2409 New Member

    Joined:
    Dec 7, 2019
    Posts:
    6
    Likes Received:
    0
    Location:
    Abergavenny
    As an addition to the above I know what the fault code says, it’s turbo boost sensor fault, what I am asking is what actually requires fixing on the turbo to resolve the engine fault, before I spend a fortune with the garage
    Thank you
     
  3. freelance

    freelance Well-Known Member

    Joined:
    Mar 5, 2009
    Posts:
    7,154
    Likes Received:
    3,147
    Location:
    essex and beyond
    Locate the boost sensor in the turbo, check wiring, clean contacts, if it still persists then the sensor will need to be replaced, trouble is it could be a general code which masks a different problem
     
    Jules2409 likes this.
< Previous Thread | Next Thread >