fans

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman

wiltshire landyman

I’m back
Posts
15,062
Location
salisbury plain wiltshire
so looking at the gap between the radiator and the viscous fan on the 300 tdi disco conversion on me fender i dont think it will work to well..

so im gonna do the leccy fan thing..kenlowe seem well exspensive,has anyone done anything apart from kenlowe and what did they use and how easy was it to fit...thanks
 
wiltshire landyman said:
so looking at the gap between the radiator and the viscous fan on the 300 tdi disco conversion on me fender i dont think it will work to well..

so im gonna do the leccy fan thing..kenlowe seem well exspensive,has anyone done anything apart from kenlowe and what did they use and how easy was it to fit...thanks
Click to expand...


nova gte fan fits lovely ;)
 
wiltshire landyman said:
didnt see the fred further down..doh
Click to expand...

WLM
A Mondeo mk3 1.8 petrol fan fits perfect in a 19J & only £11 offa Fleabay :)
Almost OEM fit. Tiny, tiny trim, 2x brackets & easy.
Just got to stop mine blowin fuses now.
Gonna wire in now wiv a relay- X-eng said their stat would switch 17A- maybe it draws more on start. I'll let you know soon if all works out.
If you pm me an email addy I can send you some pics if you want.
T
 
Tivster said:
WLM
A Mondeo mk3 1.8 petrol fan fits perfect in a 19J & only £11 offa Fleabay :)
Almost OEM fit. Tiny, tiny trim, 2x brackets & easy.
Just got to stop mine blowin fuses now.
Gonna wire in now wiv a relay- X-eng said their stat would switch 17A- maybe it draws more on start. I'll let you know soon if all works out.
If you pm me an email addy I can send you some pics if you want.
T
Click to expand...


got a 300 tdi tho which has an intercooler unlike the 19j(unless youve done summit different)
 
wiltshire landyman said:
got a 300 tdi tho which has an intercooler unlike the 19j(unless youve done summit different)
Click to expand...

Is the 300 diff'rent 2 the 200tdi?
'Cos I got a 200 rad & i/c to drop in mine- just not got round 2 it yet.
The 200 drops straight in apparently...
T

ps I can get the tape out if u want?

pps I got the tape out & 19J rad is 758mm across the frame, 625mm across the core & 70mm deep. :)
 
Why not keep the plastic cowling from the back of the 300 rad & i/c? Measure the diameter where the viscouz would usually sit then go down the scrappy and find a leccy fan the same size and attach on the opening on a switch? Got a mate that did it on a 300tdi rangy conversion and it worked well towing/off road.
Harry
 
Tivster said:
Is the 300 diff'rent 2 the 200tdi?
'Cos I got a 200 rad & i/c to drop in mine- just not got round 2 it yet.
The 200 drops straight in apparently...
T

ps I can get the tape out if u want?

pps I got the tape out & 19J rad is 758mm across the frame, 625mm across the core & 70mm deep. :)
Click to expand...
tbh its a waste of time fitting the 200 rad and intercooler into a turbo diesal as it will give you know benefits atall..

the 200 and 300 front setup is basically the same size..it will fit in yr td as long as you have the 200 defender frame for the rad/intercooler.
u can use the disco frame you just have to lower the mounts
 
got a pair of pug 106 leccy fans on my v8 switched on dash so can select
none, one or both amnd seems to work well and were easy to fit cost 12quid from scrappy
 
You must log in or register to reply here.

Similar threads

C
Military series III, does it have a different water pump? Why?
Replies
13
Views
2K
Wolf Pack
W
JT_spark
P38 DSE Auto intermittent lack of power after vehicle has been hot
Replies
8
Views
632
brianp38dse
brianp38dse
Rusty Bucket
Modify front brake hose bracket
Replies
3
Views
429
v8250
v8250
S
Wiper Parking
Replies
9
Views
472
tottot
tottot
SNOman
How to: de-ASBO my old V8
2 3
Replies
44
Views
3K
6pot
6pot
Back
Top