Fairey Drum Winch Drive Shafts
- Thread starter Spyderman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
farriermatt
Active Member
- Posts
- 200
- Location
- Norfolk
Fairey Drum Winch and Drive Shaft on eBay (end time 13-May-10 12:58:01 BST)
saw this earlier was thinking about buying it........but think chassis might be more important at moment!
saw this earlier was thinking about buying it........but think chassis might be more important at moment!
Thanks, I've been watching that. Says it was rear mounted, so could be pot luck on the shafts being the right length.
pornstarmax
Active Member
- Posts
- 400
Try GB Engineering in Brum....
...Not cheap but a seriuosly GOOD engineering shop (no I don't work there!!!!)
...Not cheap but a seriuosly GOOD engineering shop (no I don't work there!!!!)
- Posts
- 7,332
- Location
- Under my landy
Try Craddocks, we got a series 1 80" shaft from there the other day - guy told us just to go and have a look in the 'drive shaft bin' and see what we could find - they were rather suprised that they actually had a 80" drive shaft... but there we go. Price was good too.
But long and short of it - they have a big bin of drive shafts you can go and have a nose through
But long and short of it - they have a big bin of drive shafts you can go and have a nose through
The Welsh Wizard
Member
- Posts
- 69
- Location
- Newbury
Hi mate I just bought one and can take some measurements if you want
Yes, please
ashb321
Active Member
- Posts
- 200
- Location
- hemel hempstead
The Welsh Wizard
Member
- Posts
- 69
- Location
- Newbury
I'm gonna pick it up on sunday so will post back here then
oh and I may be able to get a D.T. technician at school to to make some up for you as he used to be a tool maker for mclaren f1 but I would have to check with him if you want to go down that route.
The Welsh Wizard
Member
- Posts
- 69
- Location
- Newbury
Okay so I got the winch today is it just the shafts you don't have?
or do you need the mounting bracket, universal joint and other stuff?
or do you need the mounting bracket, universal joint and other stuff?
