Failed Air suspension

S

springi891

New Member

Posts

3

Location

Uk

• Dec 9, 2019

• #1

Hi
My 2006 Range rover Sport was left for about 1 week and when i returned to it the suspension was on its arse. It does not work when buttons are pressed . I cant hear the pump working however i have taken it off and bench tested it and it operates. Ive checked the fuses and replaced the relay. Ive even re fitted the pump and used a battery direct to the pump. The pump works but nothing happens.
Any ideas please ?

 

Shimsteriom

Master Procrastinator

Posts

41,905

Location

Over Here

• Dec 9, 2019

• #2

Welcome to LandyZone

 

biketeacherdave

Well-Known Member

Posts

4,892

Location

south east london

• Dec 9, 2019

• #3

Are you actually getting pressure ?

 

brianp38dse

Well-Known Member

Posts

20,093

Location

heathrow

• Dec 9, 2019

• #4

Hello and welcome

 

S

springi891

New Member

Posts

3

Location

Uk

• Dec 10, 2019

• #5

Not sure . I cant see that from everything being fine to no feed and no pressure ?

 

biketeacherdave

Well-Known Member

Posts

4,892

Location

south east london

• Dec 10, 2019

• #6

One of the pipes is inlet one is outlet put your finger over to see if you can put your finger over the outlet and keep.it there then its nackerd

 

S

springi891

New Member

Posts

3

Location

Uk

• Dec 10, 2019

• #7

The pump does operate but i will try what you say however , there is no feed after changing relay and fuses ?

 

Gunnerhavesome

Well-Known Member

Full Member

Posts

440

Location

Sevastopol, Crimea.

• Dec 10, 2019

• #8

Welcome to the zone, If you now move or repost your question to the Range Rover section you should get some additional help from the other gurus on here.

 

Hippo

Lord Hippo

Posts

53,944

• Dec 11, 2019

• #9

Welcome to the forum

Main forum index:
www.landyzone.co.uk/forum

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10