Faded bumpers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RichM

RichM

Well-Known Member
Posts
1,840
Location
UK
My bumpers have faded on my FL and are of a lighter shade. I've seen other FL's of a similar age that have normal looking bumpers with no fade. Is there any way to restore it back to how it was without replacing it?

Here you can see what I mean:
http://farm5.static.flickr.com/4054/4672972768_cb53080a82_b.jpg

Notice the difference between the colour of the bumper and the "nudge bar".
 
Last edited:
I guess that you've already tried good old-fashioned Armor All?

It's not permanent (in that you need to do it at every wash - ideally). But it certainly put some colour back into mine.

It also have UV protectors in it - so regular use should help stop further colour fade.
 
I'm trying too get hold of some autoglymm black pastic dye as i've read in a few places and been told by a few people that it works quite well. I've also the early grey bumpers and i'm hoping this stuff will make them quite a bit darker. No luck in finding it locally though.
 
I used shoe shine to get them back to black. You need to give it two coats but once dry, it's stays on for months. I did mine in February and they don't even like they are fading yet. And it only costs 97p from ASDA :D

Just make sure you wipe off the excess off the bodywork before it dries, as it is a pain to get off.
 
Linseed oil [Willo juice] dash of old doozle oil ,dash of white spirit till it flows nice . . . . . shake it in a bottle. . . . .cheep cheerful and it works, apply with a lint free cloth and rub [word of warning] linseed oil on a cloth can self ignite [true] soak in water after use and leave under the nearest tratter :D :D :D :D
 
Hi

See [nomedia="http://www.youtube.com/watch?v=lk8U5tKQXQw"]YouTube- Restore faded plastics with heat[/nomedia] which works like magic and lasts 1 year (but it will not work on the door handles and filler cap).

For those items use Smooth Peanut butter & it lasts for about 3 months.

[nomedia="http://www.youtube.com/watch?v=4f62OwctOBc"]YouTube- How to polish plastic with peanut butter!!![/nomedia]

I did mine and just wish that I had taken before and after pics!

Good Lick (oops luck)

Den
 
I have the earlier grey bumpers and mouldings

I spray some Silicone Lubricant on a cloth and wipe it on

This removes the white marks from wax that gets on there and, returns the plastic to a very nice dark grey
 
Poorboy trim restorer is very good. I tried it out the other day, again like most its not permanent but it does improve the look of the bumpers alot. Well worth the money.
 
You must log in or register to reply here.

Similar threads

G
Green Colour?
Replies
3
Views
498
dag019
dag019
N
Freelander 2 (LR2) Advice Needed - Rust Issues
2
Replies
29
Views
5K
Ross Tait
R
SootScout
I recorded over 200 trips on my 2017 Discovery Sport to find out if its DPF is fit for purpose
2 3
Replies
44
Views
2K
Plasser
P
L
Hand brake question
Replies
14
Views
1K
romanrob
R
ChrisBduck
3.6L Land rover 90
Replies
2
Views
973
ChrisBduck
ChrisBduck
Back
Top