Exhaust

discomark10 · Jun 2, 2010

So recently i as at devils pit, i had to back up a steep bank. My back-box was hanging low and ended up getting bent over and i had to lop it off with a saw on the fly.
Now i need to do something with it.. i was wondering if there's a way to get a bit more noise (not to much mind) so i have the lovely V8 noise while im going to be fixing it, it currently has no back box and sounds about the same as it did with it on.
Also i wanted something with a bit more clearance at the back.
Ive read a few posts quoting that u can lose Torque if u take out the mid box.
I can weld so im able to make something up just want sum idea's rly.
Any idea's welcome!!

Sorry for the essay.

gcoo8154 · Jun 2, 2010

make it so it exits out of the lower rear panel my mate has his there and has no probs

try it without the mid box maybe see how loud it is

Suffolkandgood · Jun 2, 2010

I too want a exhaust that exits out the rear qtr for my 300TDi, anywhere that does one off the shelf? I'm no good with a welder

discomark10 · Jun 2, 2010

Hmm good thinking about coming out the side.
If im going to try it without the mid-box im going to have to use a back box, which i will have to buy as my 1 is trashed

gcoo8154 · Jun 2, 2010

no such thing for any model disco of the shelf side exit, they do one for a fender and it looks ****e!

dm10 try it first you might be supprised if it is to loud go to a car shop/fitting place and ask for a good scrap box(of a smaller size than standard, and weld in a smaller box, if its to loud with out the both fitted that is saves buying one

discomark10 · Jun 2, 2010

1 thing u can do to achieve the side exit is buy sum joins and bends from ebay or a car shop and just cut the back box off then use a 90 degree bend to send it to the side, as long as u get the correct sizes u can do it all with exhaust clamps - no welding needed!

gcoo8154 · Jun 2, 2010

discomark10 said:
as long as u get the correct sizes u can do it all with exhaust clamps - no welding needed!

and it will look as ruff as arse:doh:

V8_Disco · Jun 2, 2010

like this?
ive got a custom SS de-cat, sports centre box with side exit, its got a big centre box so its not too loud

discomark10 · Jun 2, 2010

Stick and exhaust tip on it

Suffolkandgood · Jun 2, 2010

Something like this is what I want.....

gcoo8154 · Jun 2, 2010

that exhaust surround looks gash

V8_Disco · Jun 2, 2010

not a fan off pointless surrounds, i chopped the rear quarter bottoms off now anyway, the exhaust exits about 10mm below the level of the boot floor

Exhaust

discomark10

Well-Known Member

gcoo8154

Well-Known Member

Suffolkandgood

New Member

discomark10

Well-Known Member

gcoo8154

Well-Known Member

discomark10

Well-Known Member

gcoo8154

Well-Known Member

V8_Disco

New Member

discomark10

Well-Known Member

Suffolkandgood

New Member

gcoo8154

Well-Known Member

V8_Disco

New Member

Similar threads