Exhaust fabrication

Afternoon, I've a 1991 200 tdi defender and just fitted a straight through middle exhaust section. Now I want to do away with the rear silencer.
I bought a 300tdi rear piece as I read it would fit straight on but it doesn't.
Different fitment and needs cutting etc to fit
Is there anybody who makes straight through rear pipes for a 200 tdi or is there anyone on here who would be able to make me one please?

YDFNL do you want a straight through pipe??

Eh?

If your asking why I want it, it's because I want it to sound louder .
Yes I know....

Each to their own. Apart from Side Exits i've not seen any kind of decent quality rear silencer deletes.

I know I should have grown out of it but at the Kelmarsh show there were some great sounding Landys.
Do you know any side exit suppliers or are they all home fabricated?

I made my own years back. Just cut out the rear box and replaced with a bolt on straight through. Then on my td5 I cut the back box out and welded in a straight section. My 110 now has a straight through with 4" side exit. I welded it myself. Sounds awesome! Where are you located?

td5 one - Bit that I cut out, bit that I welded in and the exhaust back on the car. Simples.



My 200tdi sounds awesome. The td5 sounded awesome also and a bit louder. I'm an amateur welder with a basic mig. Any garage should be able to fabricate something fairly simple if you just want a box cut out and replaced with a straight through.

I used ESR4527 on my 90