Ex-MOD 90

90Novice · Aug 31, 2022

Hi
I have just acquired an ex-mod 90 and am now engaged in the time honoured battle with electrical gremlins, specifically the old "no main beam, high beam only" issue.
The electrics are bit different to what I am used to firstly I have to contend with this

Also found this connector, not connected behind the fuse board

Any idea what this connector is?

saxavordian · Aug 31, 2022

Could be infrared light switch wires.
Have you checked the fuses may have blown a couple.

Zed. · Aug 31, 2022

90Novice said:
found this connector, not connected behind the fuse board

saxavordian said:
Could be infrared light switch wires.

thought it was for the convoy (diff) light above the rear axle

I could be wrong though

Rich.

mystery · Sep 3, 2022

Rougharse Racing · Sep 7, 2022

It's for the side lights on the civilian models, leave it disconnected if you are retaining the six way switch, connect it if you fit a civilian light switch.

owas · Sep 8, 2022

One of the first jobs to do ..

mystery · Sep 9, 2022

GRATCH · Sep 13, 2022

owas said:
One of the first jobs to do ..

Have you got a thread on this, or links to the bits?

owas · Sep 13, 2022

GRATCH said:
Have you got a thread on this, or links to the bits?

Just some ebay fuse holders and I cut and crimped on connectors one at a time copying the old fuse box.

Ex-MOD 90

90Novice

Member

saxavordian

Well-Known Member

Zed.

Well-Known Member

mystery

Well-Known Member

Rougharse Racing

Well-Known Member

owas

Well-Known Member

Attachments

mystery

Well-Known Member

GRATCH

HUGE MEMBER

owas

Well-Known Member

Similar threads