WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
I think that the flow rates we will see during normal operation make all that pretty unecessary 
. Remember that at 12v the EWP is putting the equivalent of something like 8000 revs worth of water around on a mechanical pump.
If the EBP doesn't get any power during run on mode then the issue will go away.
. Remember that at 12v the EWP is putting the equivalent of something like 8000 revs worth of water around on a mechanical pump.If the EBP doesn't get any power during run on mode then the issue will go away
.
