Everything JLR SDD related (feel free to add experiences/help).

In the archive itself patch is included. There should be a readme file as well. Check it out.

Nodge you're welcome.

Mi scuzi, I did indeed forget to include the blue patch. Uploading it now.

Pro - Many thanks !!!!
I was able to find the patch file somewhere else and used it (which will be attached to this post).
Also - The installation went smoothly (kept the computer offline...)
I do have a question please - During the setup we are required to say the details about the dealership.
My question is do we have to set something specifically (as we are using a specific user and pass) or can we plug information at freely?
Thanks,

Select UK and then _Independent and _Independent_Operator, wink.

ISO updated to include the blue patch. So no need to attach it, it's there now and link stays the same.

No need to keep computer offline or anything like that. Keep it connected you will need it online anyway when you do programming to download calibration files.

If you have 80G available go to utilities and update calibration files and as_built data so you will have them pre-downloaded.

Great work, Pro, everything works now! Thanks a lot!

hi guys
I've got virtually all my 2012 Evoque working just the steering angle sensor not communicating with various things, I've replaced it with a used part and tried to clear the codes etc. but still the same, any advice ?
calibrating with various different software including sdd keeps saying ''conditions not correct'' even dealers don't know what that message means, or so they say

Can I just ask on this, if I have a windows 10 laptop, is it still recommended to run a Win7 VM to run SDD on, or does it generally work OK running within the W10 environment ?
I've ordered a lead, downloaded the software from the link on the last page, and now getting round to sorting out the laptop. Thanks.

fisha said:

Can I just ask on this, if I have a windows 10 laptop, is it still recommended to run a Win7 VM to run SDD on, or does it generally work OK running within the W10 environment ?

Click to expand...

I'm no PC expert, but from what I can tell SDD only works on 32 bit W7 or W7 pro.
It's an old program, so wasn't written to work with Windows systems later than W7.

Hi,
All was fine with the SDD v160 until I did an online configuration for the side mirror.
Now I get this error:

Data collection error
Cause: The PAGMCP host process may have stalled.

I downloaded your version, PRO, installed just fine but still get the same error.
Can you help me please?

Thanks!

L.E. The cable is bricked, being a Mongoose clone
Can I unjam it?

L.L.E I tried another cable and still the same error
Now I'm really stuck

the clones are bullet proof I've sold over 120 systems and not one ever failed.
why 160? and is it windows 7?

PRO said:

the clones are bullet proof I've sold over 120 systems and not one ever failed.
why 160? and is it windows 7?

Click to expand...

I installed a fresh copy of windows and works. Win 10 and 163 with the as build files.
Didn't try the clone yet, will let you know.
Thanks!

PRO said:

the clones are bullet proof I've sold over 120 systems and not one ever failed.
why 160? and is it windows 7?

Click to expand...

Which reminds me, I still need to send my laptop to you for that latest SW and that HDD swap.
Obviously I'll bounce some £ to you too.

This sounds like something up my street, I'll have to get a cable and see what damage i can do

Nodge68 said:

Which reminds me, I still need to send my laptop to you for that latest SW and that HDD swap.
Obviously I'll bounce some £ to you too.

Click to expand...

yeah we are not getting any younger
I now have yet another k series freelander which guess what it needs I will give you a small hint: head gasket.
Nasty misfire as well left me on M62 to be trailered away in order to keep them cats unmelted.
4x4 working at least.

Has anyone managed to enable trailer module using sdd. I tried, but it said I had some VBF files missing.

I'll have to check that out as my parking sensors don't disable

thehelper said:

Has anyone managed to enable trailer module using sdd. I tried, but it said I had some VBF files missing.

Click to expand...

you need to go to options and download all calibration files this will take many hours, over 80gb of data and that is if you have 163 patched correctly to allow access to jlr servers for those... vbfs

kermit_rr said:

I'll have to check that out as my parking sensors don't disable

Click to expand...

for that you need engineering mode and program ccf

PRO said:

for that you need engineering mode and program ccf

Click to expand...

Thanks. It should have been enabled from New as the tow bar is listed when i look up the vin

Nodge68 said:

I've got this one. It does what I need. https://www.tlc-direct.co.uk/Produc...jwV47Ik8aZL7Jf1KkMTFolcXumSVC9N4aAhLgEALw_wcB

Click to expand...

Would any of these work, the 15amp one is out of stock everywhere, i can get 5, 30 or 40 amp. My battery is charged, its will be for while im using sdd. Also thank you for a very imformative thread