Flo1
Member
- Posts
- 10
- Location
- South Wales
Im looking for a 2.5 na engine , mine has just finished on me it’s in my series 3 and would preferred to put another 2.5 in without going in to the conversion of 200 tdi etc
Engine wanted
- Thread starter Flo1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steve2286w
Well-Known Member
- Posts
- 4,059
- Location
- monkeyangerland
200tdi without the turbo a simple fit keeping same rad, engine mountings and exhaust
Flo1
Member
- Posts
- 10
- Location
- South Wales
Is it that easy Will a disco 200tdi go in as you say with the bell housing of the 2.5 on to the series gear box ?
steve2286w
Well-Known Member
- Posts
- 4,059
- Location
- monkeyangerland
Yes I put the disco 1 in mine as a 200di this was very useful
I wanted to keep the battery and air filter in too which was doable, the engine bolts to S3 bellhousing with a small mod
I wanted to keep the battery and air filter in too which was doable, the engine bolts to S3 bellhousing with a small mod
Flo1
Member
- Posts
- 10
- Location
- South Wales
Thank you Steve for the information , I might look in to this a bit more
