engine swop

sonnex1981 · Mar 1, 2010

hi everyone

iam on to ask if any one has done the a 200tdi engine swop in to a 2.5 petrol chassis is it a hard swop or is it pretty easy is there any thing i need to look out for.

many thanks all you great people

-Defender110- · Mar 1, 2010

search..... ffs....

jamescronin · Mar 1, 2010

Welcome to landy zone.

This is one of the most commonly asked questions on he forum, and I doubt anybody will want to retype it out yet again. Just do a search .....

Basicly it's slightly more complicated than a TD diesel to 200tdi diesel swap but I'm sure you will find what you want to know

wiltshire landyman · Mar 1, 2010

welcome,,

but mate seriously this qs gets asked to death

sonnex1981 · Mar 1, 2010

sorry to ask the question new to this site and not no my way round it yet only joined because i thought people would be help ful sorry to waste your time if you dont want to help dont REPLY

Sean · Mar 1, 2010

sonnex1981 said:
sorry to ask the question new to this site and not no my way round it yet only joined because i thought people would be help ful sorry to waste your time if you dont want to help dont REPLY

but you got all the help needed within the first reply - don't you want anyone to reply to your posts ?

sonnex1981 · Mar 1, 2010

well searched and only found 10 results and half were not relevent sorry search and ffs is not much help

Sean · Mar 1, 2010

sonnex1981 said:
well searched and only found 10 results and half were not relevent sorry search and ffs is not much help

post up the search phrase you used and the links it came up with please

Pikey · Mar 1, 2010

sonnex1981 said:
well searched and only found 10 results and half were not relevent sorry search and ffs is not much help

FFS will this stop yu whinging?? http://www.landyzone.co.uk/lz/f7/how-land-rover-90-td-discovery-200tdi-engine-conversion-90679.html

Oh and it was the 5th thread on the list. when I searched using "fitting a 200TDI Engine"

-Defender110- · Mar 1, 2010

sorry to ask the question new to this site and not no my way round it yet only joined because i thought people would be help ful sorry to waste your time if you dont want to help dont REPLY

due to your sarcastic tone im assuming this is directed at me, and wish to casually point out that i did in fact help:

search..... ffs....

so, thank you for your reply (presuming of course, it is in fact directed towards yours truly) however , if you wish to ask questions without research, and then get ****y when people help, then go f**k yourself. there are a lot of helpful people on here, but normally not if u act the c**k

sonnex1981 · Mar 1, 2010

thankyou

-Defender110- · Mar 1, 2010

finally some manners

Pikey · Mar 1, 2010

sonnex1981 said:
thankyou

YA welcome.

Now pick ya fooking dummy up. and get that engine swapped over.

scott02464 · Mar 1, 2010

redhand said:
ya welcome. now pick ya fooking dummy up. And get that engine swapped over.

lol :d

wiltshire landyman · Mar 1, 2010

sonnex1981 said:
sorry to ask the question new to this site and not no my way round it yet only joined because i thought people would be help ful sorry to waste your time if you dont want to help dont REPLY

if yr gonna get arsey when youdont get the reply you want, how can you expect pepes to be helpfull back?

-Defender110- · Mar 1, 2010

if yr gonna get arsey when youdont get the reply you want, how can you expect pepes to be helpfull back?

stop... thats the second one within the hour...

engine swop

sonnex1981

New Member

-Defender110-

Well-Known Member

jamescronin

Active Member

wiltshire landyman

I’m back

sonnex1981

New Member

Sean

Banned

sonnex1981

New Member

Sean

Banned

Pikey

Dummy Ejection Facilitator..

-Defender110-

Well-Known Member

sonnex1981

New Member

-Defender110-

Well-Known Member

Pikey

Dummy Ejection Facilitator..

scott02464

Active Member

wiltshire landyman

I’m back

-Defender110-

Well-Known Member

Similar threads