you didnt order them when you were having the block done? oooops. personally i would of replaced them all and had the crank checked. but thats just me
its the top con rod bearing that gets all the wear ,bottom for the mainsJust a bit of an update engine rebuild halted again this time big end bearings when I took it apart they all looked fine but one was still in the conrod and only today during rebuild did I take it out expecting it to be like the others (its only done about 30 k ) but the white metal was worn and the copper showing through bummer so ordered more lesson learnt
and a quote helps everyone know who you are addressing
To be honest yep complete cock up the engine has only done 30 odd k miles but as you say as it is all stripped down and for the sake of a few quid all new is the way to go oh and "," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," ".""," "."
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
