My 2.5 NA when warm does not instantly reduce revs when letting go of the accelerator.
It revs high for about 5 - 10 seconds which does not seem allot but sounds worrying and it effects engine braking when slowing down. I have checked the cable etc and this is not sticking. Also just changed engine oil / filter / removed and cleaned out sump, dipstick showing correct level.
I have read that over run can be caused by the engine running on by burning the engine oil as fuel, but this always seems to end in the engine not able to be turned off and seizing? Does anyone have any suggestions?
It revs high for about 5 - 10 seconds which does not seem allot but sounds worrying and it effects engine braking when slowing down. I have checked the cable etc and this is not sticking. Also just changed engine oil / filter / removed and cleaned out sump, dipstick showing correct level.
I have read that over run can be caused by the engine running on by burning the engine oil as fuel, but this always seems to end in the engine not able to be turned off and seizing? Does anyone have any suggestions?