Engine mountings 2.25

I have a wee issue here. I bought a chassis off ebay. Which was an abandoned project. But he wanted to put a v6 in there. Now i didn't realise this until recently put he has cut off the engine mounting to fit it in.

Now does anyone know the angle which the engine mounting has to be attached for the engine. I have part of the engine mounting off my previous chassis. But the only bit i could salvage is just after where it bends off my previous chassis.

I'm pretty handy at welding so no issues there. Just need to know the angle. or Can you buy the engine mounting from somewhere?

Cheers
tom

best bet is fit the mount to the engine then lower it into position when ya happy with engine position tack weld mount to chassis and unbolt from engine. remove engine and weld mount into place.

hmm, that was my idea. but get it slightly off. Well ... No more landy

Got a new engine mounting off a series 2a 109. Mine is 88" ... I haven't compared them yet. but the 109 1 seems alot bigger. Also it's made of 2 pieces of channel fitted 2gether. Have someone bodged this, replacement or orginal. Seems pretty thick the metal compared to the other parts i've replaced like the rear xmember. so i'm guessing bodged

Cheers in advance to all ya landy geeks :L