- Posts
- 6,404
- Location
- North Perthshire
Engine mounting brackets
- Thread starter Beneagles
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
What engine is it?
- Posts
- 6,404
- Location
- North Perthshire
Brackets are from a 19j (2.5td) but are going onto a 200tdi (disco version)
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Dunno if this helps any...
It's all ah've got apart from the 300tdi
It's all ah've got apart from the 300tdi
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
The above is the same fur the 2.5 td and 200tdi so hopefully that's what ye're lookin' fur
- Posts
- 6,404
- Location
- North Perthshire
Aye - that is what I was afraid of...bloody expensive bits of metal! Cheers
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Aye ye're no kiddin'! Local scrappies no' got owt?Aye - that is what I was afraid of...bloody expensive bits of metal! Cheers
- Posts
- 6,404
- Location
- North Perthshire
"local" scrappy is a 50 mile round trip!! But yes, will have a scout round the next time I am down that way
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
Scrappy must have a telephone? Cheaper than driving 50 miles for nothing."local" scrappy is a 50 mile round trip!! But yes, will have a scout round the next time I am down that way
Beast o Bodmin
Banned
- Posts
- 17,157
i can tell ya the 2.5na/td and 200 tdi mounts are the same.I have some 200tdi mounts for sale if any help...IMG_0129 on Flickr - Photo Sharing!
Beast o Bodmin
Banned
- Posts
- 17,157
i can also get the old mounts for ya 50 quid plus post....
There the mounts designed to fit the 200tdi to a disco. they wont fit a defender unless you weld new mounting brackets to the chassis.
scott02464
Active Member
- Posts
- 710
- Location
- Up North!
As above, Iv also got a pair of these for sale, they came with my 200tdi enjin and soon realised they werent the ones!
I went to me local landy garage (None dealer!) and he had a 90 for breaking, if i can remember he only wanted 40 quid for both! I realised what a lucky lad i was and soon went back for the gearbox mounts aswell!
Beast o Bodmin
Banned
- Posts
- 17,157
ok so then.the roller mounts fit a v8 chassis rangie and my mate has them also on his defender..
well i can get a pair of n/a mounts 50 quid plus post easy.there at the yard i use..
well i can get a pair of n/a mounts 50 quid plus post easy.there at the yard i use..
Landy-ads
Active Member
- Posts
- 407
- Location
- Out the front, spanner in hand
Guys, sorry if this has been answered but where can you get the disco mounting brackets, meaning the bit that welds onto the chassis?
Can you just cut them off a disco chassis or would too much metal be lost in the process?
Cheers
Ad
Can you just cut them off a disco chassis or would too much metal be lost in the process?
Cheers
Ad
