1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Engine mount template or sizes? 300tdi

Discussion in 'Defender 90 / 110 / 130' started by Punto443, Feb 21, 2021.

< Previous Thread | Next Thread >
  1. Punto443

    Punto443 Active Member

    Joined:
    Oct 1, 2020
    Posts:
    91
    Likes Received:
    97
    Location:
    Deep fried pizza land
    Has anyone got a template or sizes for the position of 300 tdi engine mounts on the chassis of a 110?

    Or a link etc?

    Cheers
     
  2. Punto443

    Punto443 Active Member

    Joined:
    Oct 1, 2020
    Posts:
    91
    Likes Received:
    97
    Location:
    Deep fried pizza land
    Found this if its any help to anyone else :) Screenshot_20210306_214920_com.android.chrome.jpg
     
  3. Rougharse Racing

    Rougharse Racing Well-Known Member

    Joined:
    Jan 27, 2017
    Posts:
    746
    Likes Received:
    420
    Location:
    The Grim North
    It depends on which gearbox you are using, if it is the long bell-housing R380 then copy a Discovery 300tdi, if it is a military stumpy bell-housing or LT77, buy a set from Steve Parker Land Rovers, they use two existing bolts to align them and save a lot of faffing about.
     
  4. jamesmartin

    jamesmartin Well-Known Member

    Joined:
    Dec 8, 2010
    Posts:
    91,824
    Likes Received:
    20,211
    Location:
    louth lincs
    stumpy bell housing was produced to fit r380 boxes into warranty 200tdi landys as they stopped lt77 production completely,when 300 and r380 came out
     
< Previous Thread | Next Thread >