Freelander 2 (LR2) Engine earth mod

Anyone know the length and size of cable needed for the extra engine ground mod? (Winters here)

Stv123 said:

Anyone know the length and size of cable needed for the extra engine ground mod? (Winters here)

Click to expand...

I used a 760mm long 25mm black starter cable, with a 6mm lug on one end (for the battery end) and a 10mm lug on the other (starter end).
I drilled a suitable hole in the bottom of the battery tray, then ran the wire between the spare 6mm thread on the neg clamp and the top starter securing bolt. I then cable tied the cable along the original harness for neatness.

Thank for that

few photo in the thread below.
https://www.landyzone.co.uk/land-rover/fl2-xs-td4-e-economy-mode.359137/#post-4856978