Engine Colour

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

border

Well-Known Member
Posts
3,517
Location
North East. UK

Attachments

  • IMG_20211011_174704 (3).jpg
    IMG_20211011_174704 (3).jpg
    262.3 KB · Views: 97
  • IMG_20211001_185940.jpg
    IMG_20211001_185940.jpg
    187 KB · Views: 98
yes.1/2 a can brushed on,it could be much better but doing the whole vehicle kept me busy,i hand painted all the bodywork as best i could.
20211014_160504.jpg
20211014_160556.jpg
 
Last edited:
yes.1/2 a can brushed on,it could be much better but doing the whole vehicle kept me busy,i hand painted all the bodywork as best i could.View attachment 250360 View attachment 250362
Thanks yours looks a bit blueyer then mine,
No that is Nice, just got all my brand new 12 volt bits to fit today but will have to wait untill paint comes Monday before I can fit them, hope I can get a nice finish like that with my Brush
 
Put a little some of it on today, just a very thin coat but looks like its gonna turn out decent with a couple of coats
 

Attachments

  • IMG_20211017_163241.jpg
    IMG_20211017_163241.jpg
    245.6 KB · Views: 100
Well whats going on with this paint, tried a bit on the other day on top of the original military paint in pic above, and its just Flaking off, dont know whats gone wrong there is it the paint ?, or should I have put a primer or something on first,
 

Attachments

  • IMG_20211019_173127.jpg
    IMG_20211019_173127.jpg
    191 KB · Views: 94
  • IMG_20211019_173232.jpg
    IMG_20211019_173232.jpg
    211.3 KB · Views: 94
Well whats going on with this paint, tried a bit on the other day on top of the original military paint in pic above, and its just Flaking off, dont know whats gone wrong there is it the paint ?, or should I have put a primer or something on first,


Looks like a good key and degrease was in order.

^^ this one. Looking at the condition of the rest of the engine that has not been painted I would suggest it is not clean enough to take the paint properly. Needs to be fully degreased and clean and anywhere accessible give a quick rub over with some sandpaper to give it a key.
 
^^ this one. Looking at the condition of the rest of the engine that has not been painted I would suggest it is not clean enough to take the paint properly. Needs to be fully degreased and clean and anywhere accessible give a quick rub over with some sandpaper to give it a key.
Done excactley that mate and it has gone on OK this time Thanks.
 
Back
Top