ELP! S3 lightweight clutch pipe nut needed

Hi All,

I need to get my hands on the male nut which attaches the clutch pipe to the clutch slave cyl. I think its 1/4" pipe and the thread is UNF (I'm told so anyway). Paddocks say they are no longer available?

Thanks for any help in advance

/Ian

i'd have thought you would be able to get a fitting from a motor spares shop or somewhere like that.

did the nut round off? i've just had to replace a burst clutch line, turned out to be easier to take the hole slave cylinder and pipe from my donor vehicle than to try and remove the pipe on its own!

I had a problem with fluid leaking from the nut area and the nut is a bit rounded. I cut the tube back and will put a new flange on it. Ideally I'd like to put a new nut on there.

I tried the local car spares place today, no luck. I'll try another one tomorrow.