Electrical part id

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
On my 2a the yellow choke light only came on when the engine warmed up to remind one to put it in. A little switch on the choke cable near the bulkhead switched the light off when choke pushed in.
 
That's what I thought also. I left it running long enough for the engine to warm up completely and choke open or closed the light stayed on. I believe I read the ground needed to be checked.
 
You must log in or register to reply here.

Similar threads

Rhode rover
Electrical part identity
Replies
10
Views
2K
tottot
tottot
C
Freelander 2 – Sudden heavy judder/stall-like jolt under load after clutch/flywheel & driveshaft seal replacement
Replies
12
Views
2K
Bounty
Bounty
TheYellowLandy
SIII - Brake warning light issues
Replies
9
Views
2K
TheYellowLandy
TheYellowLandy
DefendingLancashire
Advice on decent flasher relay replacements? (1996 Defender 90)
Replies
0
Views
678
DefendingLancashire
DefendingLancashire
A
Help Needed - Freelander 1 facelift front fogs
Replies
6
Views
1K
Nodge68
Nodge68
Back
Top